Analog Radios Amateur
VHF/UHF DUAL BAND TRANSCEIVERS
IC-2730A (Analog Radios)
Practical Dual Bander with Optional Bluetooth® Headset
Dual Band Mobile with Optional Bluetooth®
Analog has never been so simple as with the IC-2730A! The IC-2730A is an easy-to-use, dual-band mobile with simultaneous receive as 50 Watts RF output on both VHF and UHF. The separate tuning, volume, and squelch knobs, as well as basic control buttons, on each side of the radio, allowing you to have quick and precise control over your radio without taking your eyes off the road.
Specification
General
|
Frequency coverage |
USA Version |
Transmit |
144–148, 430–450MHz |
|
|
|
Receive |
118–174, 375–550MHz*1 |
|
|
Export Version |
Transmit |
137–174, 400–470MHz*2 |
|
|
|
Receive |
118–174, 375–550MHz*2 |
|
No. of memory channels |
1052 channels (including 50 scan edges and 2 Call) |
|
|
|
Type of emission |
F2D, F3E (FM, FM-N) |
|
|
|
Frequency stability |
±2.5ppm |
|
|
|
Power supply requirement |
13.8V DC ±15% |
|
|
|
Current drain (approximate) |
Tx |
13A |
|
|
|
Rx |
1.8A/1.2A (Max. audio/Stand-by) |
|
|
Antenna impedance |
50Ω (SO-239) |
|
|
|
Operating temperature range |
−10°C to +60°C; 14°F to +140°F |
|
|
|
Dimensions (W×H×D Projections are not included) |
Main unit |
150×40×151 mm; 5.91×1.57×5.94 in |
|
|
|
Controller |
150×50×27.2 mm; 5.91×1.97×1.07 in |
|
|
Weight (approx.) |
Main unit |
1.2 kg; 2.65 lb |
|
|
|
Controller |
140 g; 4.94 oz |
|
Guaranteed range:
*1 144–148, 430–450MHz.
*2 144–148, 430–440MHz
Transmitter
|
Output power (at 13.8V DC) |
50W, 15W, 5W (TPE version: 25W, 15W, 5W) |
|
Max. frequency deviation |
±5.0kHz/±2.5kHz (W/N) |
|
Spurious emissions |
Less than −60dBc |
|
Microphone impedance |
600Ω (8-pin modular) |
Receiver
|
Intermediate frequencies |
A band |
38.85MHz/450kHz |
|
|
B band |
46.35MHz/450kHz |
|
Sensitivity (at 12dB SINAD) |
Less than 0.18μV |
|
|
Selectivity |
More than 60dB/55dB (W/N) |
|
|
Spurious response rejection |
A band |
More than 60dB/55dB (V/U) |
|
|
B band |
More than 60dB/60dB (V/U) |
|
Audio output power |
More than 2W (10% dist. 8Ω) |
|
|
External speaker connector |
2 conductor 3.5 (d) mm (1/8″)/8Ω |
|
|
Receiver sensitivity (Not guaranteed, for your reference only) |
FM/FM-N (12dB SINAD) |
137–159.995MHz*: Less than 0.32μV 160–174.000MHz: Less than 0.56μV 375–399.995MHz: Less than 0.56μV 400–499.995MHz*: Less than 0.32μV 500–550.000MHz: Less than 0.56μV |
|
|
AM/AM-N (10dB S/N) |
118–136.991MHz: Less than 1μV |
* Except amateur bands.
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
|
Standard
|
MIL-810 G |
MIL-810 G |
|
|
Method |
Procedure |
|
High Temperature |
501.5 |
I, II |
|
Low Temperature |
502.5 |
I, II |
|
Vibration |
514.6 |
I |
|
Shock |
516.6 |
I, IV |
Also meets equivalent MIL-STD-810-C, -D -E and -F.
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
-
Hand microphone, HM-207
-
Controller cable
-
Microphone hanger
-
DC power cable
-
Spare fuses
Reviews
There are no reviews yet.