Analog Radios Amateur
144 MHz FM TRANSCEIVERS
IC-2300H (Analog Radios)
Tough & Built to Last
Long Lasting Power and Icom Quality
ICOM IC-2300H VHF FM Transceivers continue the tradition of powerful and ruggedly solid 2 meter mobile transceivers. IC-2300H transceivers provide a full 65 watts of stable output power to “make the trip.” A built-in CTCSS and DTCS encoder/decoder, 207 alpha-numeric memory channels, a myriad of scan functions, weather channel receive and alert functions, and exceptional MIL-STD-810 G specification durability round out these versatile radios.
The Icom IC-2300H can generate 65W of output power. The rugged aluminum diecast chassis provides effective heat dissipation and keeps RF output even during high duty cycle continuous transmission. Output power is selectable in 4-steps (65/25/10/5W).
Specification
General
|
Number of channels |
207 channels (including 6 scan edges, and 1 call) |
|
|
Type of emission |
F2D, F3E (FM) |
|
|
Power supply requirement |
13.8 V DC ±15% |
|
|
Current drain |
Tx (65 W) |
11 A |
|
Rx |
Stand-by |
0.4 A |
|
Max. audio |
1.5 A |
|
|
Antenna impedance |
50 Ω (SO-239) |
|
|
Operating temperature range |
–10°C to +60°C; 14°F to +140°F |
|
|
Dimensions (projections not included; W×H×D) |
140×40×162 mm; 5.5×1.6×6.4 in |
|
|
Weight (approx.) |
1.1 kg; 2.43 lb |
* Guaranteed range TX/RX: 144–148 MHz
Transmitter
|
Output power* (at 13.8 V DC) |
65 W, 25 W, 10 W, 5 W |
|
|
Max. frequency deviation |
Wide |
±5.0 kHz |
|
Narrow |
±2.5 kHz |
|
|
Spurious emissions |
Less than –60 dBc |
|
|
Frequency stability |
±3 ppm |
|
|
Microphone impedance |
600 Ω (8-pin modular) |
* Output power differs depending on version and specific regulatory requirements.
Receiver
|
Intermediate frequencies |
46.35 MHz/450 kHz |
|
|
Sensitivity at 12dB SINAD |
Less than 0.18 μV |
|
|
Adjacent channel selectivity |
Wide |
More than 6 kHz (at 6 dB) Less than 14 kHz (at 60 dB) |
|
Narrow |
More than 3 kHz (at 6 dB) Less than 9 kHz (at 55 dB) |
|
|
Spurious response rejection |
More than 60 dB |
|
|
Audio output power |
4.5 W typ. (10% dist. 4 Ω load) |
|
|
External speaker connector |
2-conductor 3.5 (d) mm (1⁄8ʺ)/4 Ω |
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
|
Standard
|
MIL-810 G |
|
|
Method |
Procedure |
|
|
Low Pressure |
500.5 |
I, II |
|
High Temperature |
501.5 |
I, II |
|
Low Temperature |
502.5 |
I, II |
|
Temperature Shock |
503.5 |
I-C |
|
Solar Radiation |
505.5 |
I |
|
Vibration |
514.6 |
I |
|
Shock |
516.6 |
I, IV |
Also meets equivalent MIL-STD-810-C, -D -E and -F.All stated specifications are subject to change without notice or obligation.
Supplied Accessories
-
Remote control Mic, HM-133V
-
Mounting bracket kit
-
Microphone hanger*
-
DC power cable
-
Spare fuses
(* Depending on version)
Reviews
There are no reviews yet.