UL Approved Intrinsically Safe Digital Radio
with 5 W Output Power and Compact Design
The IC-F52D-UL/F62D-UL is a UL approved intrinsically safe
radio. A full 5 W of output power is available with this approval.
Other safety features such as Man Down, Lone Worker and
Emergency Call functions help your team remain connected in
hazardous locations.
Small, light and feature packed
Multiple operating modes*1
• Analog FM
• NXDN™/dPMR™ conventional
• Upgradable to NXDN ™ Type-D trunking
• Upgradable to dPMR ™ Mode 3 trunking*2
*1 NXDN/dPMR modes are not compatible with each other. The radio protocol/
mode cannot be changed after purchase. *2 Not available in all regions.
Full dot-matrix display, rotary channel and
volume knob for simple every-day operation
Built-in Bluetooth® capability, Voice Recording,
Active Noise Cancelling functions
Motion/Stationary Detection, Man Down and
Lone Worker functions
OTAP (Over-the-Air Programming) function
easily reconfigures in-the-field radios
Intelligent battery management helps extend
the battery life
Specification
General
IC-F52D | IC-F62D | ||
---|---|---|---|
Frequency coverage* (* Depending on version) |
136–174 MHz | (NXDN Version) 350–400, 400–470, 450–512, 450–520 MHz (dPMR Version) |
|
Number of channels | 512 channels /128 zones | ||
Type of emission* (* Depending on version) |
(NXDN Version) 16K0F3E*, 14K0F3E, 11K0F3E, 8K50F3E, 8K30F1E/D, 4K00F1E/D (dPMR Version) * 25 kHz bandwidth is no longer available for FCC Part 90 |
||
Power supply requirement | 7.5 V DC nominal | ||
Current drain (approx.) | Tx | 1.8 A | |
Rx | 500 mA /170 mA (Max. audio (internal SP)/Standby) |
||
Antenna impedance | 50 Ω | ||
Operating temperature range | −30 °C to +60 °C; −22 °F to +140 °F (Radio specifications) |
||
Dimensions (W × H × D; Projections not included) |
56 × 91.5 × 36.5 mm; 2.2 × 3.6 × 1.4 in (With BP-294) |
||
Weight (approx.) | 125 g; 4.4 oz (main unit) | ||
270 g; 9.5 oz (BP-294, MBB-3) |
Transmitter
IC-F52D | IC-F62D | |
---|---|---|
Output power (Hi, L2, L1) | 5 W, 2 W, 1 W | |
Frequency stability | ±1.0 ppm | |
Spurious emissions | 80 dB typ. (USA) | |
0.25 μW (≤ 1 GHz), 1.0 μW (> 1 GHz) (EUR) | ||
FM Hum and noise | 57 dB typ. (@25 kHz), 55 dB typ. (@12.5 kHz) (USA) |
57 dB typ. (@25 kHz), 56 dB typ. (@12.5 kHz) (USA) |
Audio harmonic distortion | 0.4% typ. (AF 1 kHz 40% deviation) | |
FSK error | 1% typ. (@DVN, DN) |
Receiver
IC-F52D | IC-F62D | ||
---|---|---|---|
Sensitivity | Analog (12 dB SINAD) |
0.23 μV typ. | |
Analog (20 dB SINAD) |
−4.0 dBμV emf typ. (@25 kHz), −1.4 dBμV emf typ. (@12.5 kHz) |
−4.0 dBμV emf typ. (@25 kHz), −1.1 dBμV emf typ. (@12.5 kHz) |
|
Digital (1% BER) |
−5.0 dBμV emf typ. (0.28 μV typ. ) (@DVN), −3.0 dBμV emf typ. (0.35 μV typ. ) (@DN) |
−4.0 dBμV emf typ. (0.32 μV typ. ) (@DVN), −3.0 dBμV emf typ. (0.35 μV typ. ) (@DN) |
|
Adjacent channel |
Analog | 79 dB typ. (@25/20 kHz), 77 dB typ. (@12.5 kHz) |
76 dB typ. (@25/20 kHz), 73 dB typ. (@12.5 kHz) |
Digital | 70 dB typ. (@DVN), 72 dB typ. (@DN) |
66 dB typ. (@DVN), 68 dB typ. (@DN) |
|
Spurious response rejection | 76 dB typ. | 78 dB typ. | |
Intermodulation rejection | Analog | 76 dB typ. (USA) 68 dB typ. (EUR) |
74 dB typ. (USA) 68 dB typ. (EUR) |
Digital | 73 dBμV emf typ. (@DVN)/−40 dBm typ. (@DN) | ||
Audio output power | Internal SP | 1300 mW typ. (at 5% distortion, 8 Ω load) | |
External SP | 1000 mW typ. (at 5% distortion, 8 Ω load) 1300 mW typ. (at 5% distortion, 8 Ω load) with HM-222H* |
Measurements made in accordance with TIA-603, EN300 086, EN301 166, EN300 113.
All stated specifications are subject to change without notice or obligation.
DVN: Digital Very Narrow (6.25 kHz), DN: Digital Narrow (12.5 kHz). DN is for NXDN version only.
*Depending on versions
Applicable U.S. Military Specifications & IP Rating
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard | MIL-810 G | |
---|---|---|
Method | Procedure | |
Low Pressure | 500.5 | I, II |
High Temperature | 501.5 | I, II |
Low Temperature | 502.5 | I, II |
Temperature Shock | 503.5 | I-C |
Solar Radiation | 505.5 | I |
Rain Blowing/Drip | 506.5 | I, III |
Humidity | 507.5 | II |
Salt Fog | 509.5 | – |
Dust Blowing | 510.5 | I |
Immersion | 512.5 | I |
Vibration | 514.6 | I |
Shock | 516.6 | I, IV |
Also meets equivalent MIL-STD-810-C, -D -E and -F.
Applicable IP Rating
Ingress Protection Standard | |
---|---|
Dust & Water | IP67/66/55/54 |
Some functions and options will be available in the future.
Supplied Accessories
- Battery pack, BP-290
- Belt clip, MBB-3
Please note that Battery charger and Antenna are must be purchased separatelly.
Reviews
There are no reviews yet.