Analog Radios Amateur
VHF/UHF DIGITAL TRANSRECEIVER
IC-U86 (Analog Radios)
7 W Output Power and 1500 mW Audio
2M with Powerful Audio
The IC-U86 gives you more audio, more RF power, more coverage, and more battery capacity in a compact, MIL-STD portable. With 1.5W of receive audio power and a new chassis design, the IC-U86 enables users to hear incoming signals in loud, noisy environments. The IC-V86 expands users’ radios coverage with 7W of RF output power, and the new 2250mAh Li-Ion battery pack provides longer operational capabilities.
Specification
General
|
|
|
|
IC-U86 |
|
Frequency range (TX/RX guaranteed range) |
|
|
TX: 430–450 MHzRX: 400–472 MHz |
|
Type of emissions |
|
|
|
|
Number of channels |
|
|
|
|
Antenna impedance |
|
|
|
|
Power supply requirement |
|
|
|
|
Operating temperature range |
|
|
|
|
Frequency stability |
|
|
|
|
Current drain (For the transceiver with a “U” mark on the serial number label) |
TX (EX Hi/Hi/Mid/Low) |
|
EXP1: 1.6/1.5/1.0/0.5 A typ. EXP2: 1.6/1.4/0.9/0.5 A typ. |
|
|
RX (Max. audio) |
|
450 mA typ. (INT SP),190 mA typ. (EXT SP, Single end)450 mA typ. (EXT SP, BTL) |
|
Dimensions (W×H×D) (Projections not included) |
|
|
|
|
Weight (Approximate) |
|
|
290 g, 10.2 oz(with BP-298, FA-B57U) |
Transmitter
|
|
|
IC-U86 |
|
Output power (EX Hi/Hi/Mid/Low) |
|
5.5/4/2/0.5 W |
|
Maximum frequency deviation |
|
±5.0 kHz/±2.5 kHz (Wide/Narrow) |
|
Spurious emissions |
|
Less than –60 dB |
|
External microphone connector |
|
3-conductor 2.5 (d) mm (1/10″)/2.2 kΩ |
Receiver
|
|
|
IC-U86 |
|
Sensitivity |
|
EXP1: –121 dBm typicalEXP2: –123 dBm typical |
|
Squelch sensitivity |
|
EXP1: –123 dBm typicalEXP2: –125 dBm typical |
|
Selectivity (Wide/Narrow) |
|
70 dB typical/68 dB typical |
|
Intermodulation |
|
|
|
Audio output power (For the transceiver with a “U” mark on the serial number label) |
|
1500 mW typical (with 8 Ω load) |
|
|
|
450 mW typical (single end)1500 mW typical (BTL, HM-222HLWP connected) |
|
External speaker connector |
|
|
Applicable U.S. Military Specifications
|
Standard
|
MIL-810 G |
MIL-810 G |
|
|
Method |
Procedure |
|
Low Pressure |
500.5 |
I, II |
|
High Temperature |
501.5 |
I, II |
|
Low Temperature |
502.5 |
I, II |
|
Temperature Shock |
503.5 |
I-C |
|
Solar Radiation |
505.5 |
I |
|
Rain Blowing/Drip |
506.5 |
I, III |
|
Humidity |
507.5 |
II |
|
Salt Fog |
509.5 |
– |
|
Dust Blowing |
510.5 |
I |
|
Vibration |
514.6 |
I |
|
Shock |
516.6 |
I, IV |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
Applicable IP Rating
|
Ingress Protection Standard |
|
|
Dust and Water |
IP54 (Dust-protection, water resistance) |
All stated specifications are subject to change without notice or obligation
Supplied Accessories
-
BP-298/BP-264, battery pack*
-
BC-240, Desktop charger
-
BC-242, AC adapter
-
MB-124, belt clip
-
Antenna*
* May differ, depending on transceiver version
Reviews
There are no reviews yet.