0812 8888 3328
Call Mon - Fri 8.00am - 5.30pm

UL Approved Intrinsically Safe Digital Radio
with 5 W Output Power and Compact Design

The IC-F52D-UL/F62D-UL is a UL approved intrinsically safe
radio. A full 5 W of output power is available with this approval.
Other safety features such as Man Down, Lone Worker and
Emergency Call functions help your team remain connected in
hazardous locations.
Small, light and feature packed
Multiple operating modes*1
• Analog FM
• NXDN™/dPMR™ conventional
• Upgradable to NXDN ™ Type-D trunking
• Upgradable to dPMR ™ Mode 3 trunking*2
*1 NXDN/dPMR modes are not compatible with each other. The radio protocol/
mode cannot be changed after purchase. *2 Not available in all regions.
Full dot-matrix display, rotary channel and
volume knob for simple every-day operation
Built-in Bluetooth® capability, Voice Recording,
Active Noise Cancelling functions
Motion/Stationary Detection, Man Down and
Lone Worker functions
OTAP (Over-the-Air Programming) function
easily reconfigures in-the-field radios
Intelligent battery management helps extend
the battery life

Specification

General

IC-F52D IC-F62D
Frequency coverage*
(* Depending on version)
136–174 MHz (NXDN Version)
350–400, 400–470,
450–512, 450–520 MHz

(dPMR Version)
400–470 MHz

Number of channels 512 channels /128 zones
Type of emission*
(* Depending on version)
(NXDN Version)
16K0F3E*, 14K0F3E,
11K0F3E, 8K50F3E,
8K30F1E/D, 4K00F1E/D

(dPMR Version)
16K0F3E*, 14K0F3E,
8K50F3E, 4K00F1E/D

* 25 kHz bandwidth is no longer available for FCC Part 90
licensees for USA versions.

Power supply requirement 7.5 V DC nominal
Current drain (approx.) Tx 1.8 A
Rx 500 mA /170 mA
(Max. audio (internal SP)/Standby)
Antenna impedance 50 Ω
Operating temperature range −30 °C to +60 °C;
−22 °F to +140 °F
(Radio specifications)
Dimensions
(W × H × D;
Projections not included)
56 × 91.5 × 36.5 mm; 2.2 × 3.6 × 1.4 in
(With BP-294)
Weight (approx.) 125 g; 4.4 oz (main unit)
270 g; 9.5 oz (BP-294, MBB-3)

Transmitter

IC-F52D IC-F62D
Output power (Hi, L2, L1) 5 W, 2 W, 1 W
Frequency stability ±1.0 ppm
Spurious emissions 80 dB typ. (USA)
0.25 μW (≤ 1 GHz), 1.0 μW (> 1 GHz) (EUR)
FM Hum and noise 57 dB typ. (@25 kHz),
55 dB typ. (@12.5 kHz)
(USA)
57 dB typ. (@25 kHz),
56 dB typ. (@12.5 kHz)
(USA)
Audio harmonic distortion 0.4% typ. (AF 1 kHz 40% deviation)
FSK error 1% typ. (@DVN, DN)

Receiver

IC-F52D IC-F62D
Sensitivity Analog
(12 dB SINAD)
0.23 μV typ.
Analog
(20 dB SINAD)
−4.0 dBμV emf typ.
(@25 kHz),
−1.4 dBμV emf typ.
(@12.5 kHz)
−4.0 dBμV emf typ.
(@25 kHz),
−1.1 dBμV emf typ.
(@12.5 kHz)
Digital
(1% BER)
−5.0 dBμV emf typ.
(0.28 μV typ. ) (@DVN),
−3.0 dBμV emf typ.
(0.35 μV typ. ) (@DN)
−4.0 dBμV emf typ.
(0.32 μV typ. ) (@DVN),
−3.0 dBμV emf typ.
(0.35 μV typ. ) (@DN)
Adjacent
channel
Analog 79 dB typ. (@25/20 kHz),
77 dB typ. (@12.5 kHz)
76 dB typ. (@25/20 kHz),
73 dB typ. (@12.5 kHz)
Digital 70 dB typ. (@DVN),
72 dB typ. (@DN)
66 dB typ. (@DVN),
68 dB typ. (@DN)
Spurious response rejection 76 dB typ. 78 dB typ.
Intermodulation rejection Analog 76 dB typ. (USA)
68 dB typ. (EUR)
74 dB typ. (USA)
68 dB typ. (EUR)
Digital 73 dBμV emf typ. (@DVN)/−40 dBm typ. (@DN)
Audio output power Internal SP 1300 mW typ. (at 5% distortion, 8 Ω load)
External SP 1000 mW typ. (at 5% distortion, 8 Ω load)
1300 mW typ. (at 5% distortion, 8 Ω load) with HM-222H*

Measurements made in accordance with TIA-603, EN300 086, EN301 166, EN300 113.
All stated specifications are subject to change without notice or obligation.

DVN: Digital Very Narrow (6.25 kHz), DN: Digital Narrow (12.5 kHz). DN is for NXDN version only.
*Depending on versions

Applicable U.S. Military Specifications & IP Rating

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard MIL-810 G
Method Procedure
Low Pressure 500.5 I, II
High Temperature 501.5 I, II
Low Temperature 502.5 I, II
Temperature Shock 503.5 I-C
Solar Radiation 505.5 I
Rain Blowing/Drip 506.5 I, III
Humidity 507.5 II
Salt Fog 509.5
Dust Blowing 510.5 I
Immersion 512.5 I
Vibration 514.6 I
Shock 516.6 I, IV

Also meets equivalent MIL-STD-810-C, -D -E and -F.

Applicable IP Rating

Ingress Protection Standard
Dust & Water IP67/66/55/54

Some functions and options will be available in the future.

Supplied Accessories

  • Battery pack, BP-290
  • Belt clip, MBB-3

Please note that Battery charger and Antenna are must be purchased separatelly.

Reviews

There are no reviews yet.

Be the first to review “ICOM IC-F52D UL/IC-F62D UL”

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *