SMART Tune® VHF Mini Line Amplifier (VSTLAD)
KEY FEATURES:
- Adjustable Line Length Compensation
- High Noise immunity
- IP66 Enclosure
- Digital Diagnostic
- Voice and Data Capable
- 12, 24 and 48VDC versions
SCS 1000 series VHF SMARTTune In-Line Amplifier with Adjustable LLC
DESCRIPTIONS:
The VSTLAND SMARTTune® is a quantum step forward in amplifier design, offering a very SMART attenuator, which means that you can literally install SMARTTune® amplifiers anywhere in the leaky feeder cable and the amplifier will set its gain according to the level of input signal received from the previous amplifier. As all amplifiers include AGC in the common path, the level of output signal in the Base TX direction will be constant. This constant output of power is used by the next amplifier in the system as a measure of the gain required. If the cable is longer, the more gain will be applied etc. Voice and Data capable and is packed in an IP66 heavy duty enclosure. The amplifier i powered from leaky feeder cable; no special tools are required to splice it into the leaky feeder cable.
The SMARTTune® amplifier incorporates 2 separate amplifiers, TX Down-Link and RX Up-Link. The VSTLAD line amplifier also offers Digital Drive-By Diagnostics, in the form of 11 high intensity LED’s, which indicate the condition of the amplifier. Simply by walking or driving past the amplifier you can determine its condition – VOLTAGE – 3 LED Volt Meter, CURRENT drain – 3 LED Amp meter and Amplifier Gain – 5 LED meter. The amplifier was specially designed for the transmission of high speed Data, it utilizes 6 filters whereas some manufacturers only offer 2 filters. The VSTLAD amplifier offers a high level of sideband immunity, as well as a high level of immunity from external noise.
SPECIFICATIONS:
Frequency: | Uplink 168 to 175 MHz, Downlink 152 to 158 MHz |
Bandwidth: | Uplink 2.5 MHz, Downlink 2.5 MHz |
Gain: | 26dB min |
Connection: | Brass Screw Terminals |
Impedance: | 75 Ohm standard, 50 Ohm option |
Through Current Capacity: | 1.5 Amps |
Operating Voltage: | 12, 24 or 48V versions |
Current drain: | Less than 200mA at 12 VDC |
Enclosure: | IP66 heavy duty enclosure c/w IP66 cable glands |
Weight and dimensions: | 1 Kg, 190 x 75 x 57mm, excluding glands |
Reviews
There are no reviews yet.