The VST Stopes Antenna is an antenna designed to be fitted in place of the line termination normally fitted at the end of a Leaky Feeder cable. The Stopes Antenna will increase the radiated signals from the Leaky Feeder by a factor of about 40dB.
KEY FEATURES:
- Voice Compatible
- No Internal Switching or Tuning
- IP66 Enclosure
- Brass Terminal Connectors
- Intrinsic Safe Versions Available
- Stainless Steel Radials
DESCRIPTION:
The VST Stopes Antenna is an antenna designed to be fitted in place of the line termination normally fitted at the end of a Leaky Feeder cable. The Stopes Antenna will increase the radiated signals from the Leaky Feeder by a factor of about 40dB.
The Stopes Antenna is a passive device and does not draw any power from the Leaky Feeder cable. It has a good impedance match over the full VHF range of the Leaky Feeder.
FEATURES:
- 2 KV isolation between each of the radials as well as the cable
- Good impedance match
- Improved radiation efficiency
- Wide band impedance match
SPECIFICATIONS:
| Frequency: | 150 to 175Mhz |
| Impedance: | 75 Ohm |
| VSWR: | Less than 3:1, 150 to 175Mhz |
| Current Consumption: | None |
| Voltage Rating: | 2 KV |
| Connectors: | Brass screw terminal and saddle clamp |
| Enclosure: | IP66, GRP, Colour Grey |
| Weight and Dimensions: | 2.0kg. Enclosure: 160 x 75 x 60mm. Radials: 16mm diameter x 450mm, 2 Off |
Reviews
There are no reviews yet.